Palette czyli gradient koloruGradient_(grafika) w Wikipedii

Wstęp Gradient koloru może być: ciągły / nieciągły ( dyskretny), szary/kolorowy.

Color mapping Gradient ciągły korzysta z mapowania koloru (ang. color mapping), które może być: ciągle korzysta z analitycznych formuł (wzorów). Zobacz polecenia rgbformulae i functions, nieciągle (dyskretne) korzysta z tabel do interpolacji. Zobacz polecenia palette defined i palette file.

Show Sprawdzamy jaki mamy standardowy gradient kolorów (tradycyjny pm3d – czarny-niebieski-czerwony-żółty):

show palette

Otrzymujemy: palette is COLOR rgb color mapping by rgbformulae are 7,5,15 figure is POSITIVE all color formulae ARE NOT written into output postscript file allocating ALL remaining color positions for discrete palette terminals Color-Model: RGB gamma is 1.5

Test Wykres składowych koloru otrzymamy:

test palette/src/command.c

Możemy to zapisać do pliku png:

set terminal png set output 'p.png' test palette

gdzie : NTSC gray value : calculated using NTSC coefficients to map RGB onto a grayscalePoynton's Color FAQ by Charles Poynton the NTSC luminance, which corresponds to the Y channel in the YIQ model. It indicates the result if the color were displayed on a black-and-white TV screenhttps://livebook gnuplot-in-action-second-edition by P K Janert ważona suma liniowych składników RGBLuma_(video) w ang wikipedii

//from function test_palette_subcommand from command.c ntsc = 0.299 * rgb.r + 0.587 * rgb.g + 0.114 * rgb.b;

Kod :

// command.c /* * process the 'test palette' command * 1) Write a sequence of plot commands + set commands into a temp file * 2) Create a datablock with palette values * 3) Load the temp file to plot from the datablock * The set commands then act to restore the initial state */ static void test_palette_subcommand() { enum {test_palette_colors = 256}; struct udvt_entry *datablock; char *save_replot_line; TBOOLEAN save_is_3d_plot; int i;

static const char pre1[] = "\ reset;\ uns border; se tics scale 0;\ se cbtic 0,0.1,1 mirr format '' scale 1;\ se xr[0:1];se yr[0:1];se zr[0:1];se cbr[0:1];\ set colorbox hor user orig 0.05,0.02 size 0.925,0.12;";

static const char pre2[] = "\ se lmarg scre 0.05;se rmarg scre 0.975; se bmarg scre 0.22; se tmarg scre 0.86;\ se grid; se xtics 0,0.1;se ytics 0,0.1;\ se key top right at scre 0.975,0.975 horizontal \ title 'R,G,B profiles of the current color palette';";

static const char pre3[] = "\ p NaN lc palette notit,\ $PALETTE u 1:2 t 'red' w l lt 1 lc rgb 'red',\ '' u 1:3 t 'green' w l lt 1 lc rgb 'green',\ '' u 1:4 t 'blue' w l lt 1 lc rgb 'blue',\ '' u 1:5 t 'NTSC' w l lt 1 lc rgb 'black'\ \n";

FILE *f = tmpfile();

#if defined(_MSC_VER) || defined(__MINGW32__) /* On Vista/Windows 7 tmpfile() fails. */ if (!f) { char buf[PATH_MAX]; /* We really want the "ANSI" version */ GetTempPathA(sizeof(buf), buf); strcat(buf, "gnuplot-pal.tmp"); f = fopen(buf, "w+");

#endif

while (!END_OF_COMMAND) c_token++; if (!f) int_error(NO_CARET, "cannot write temporary file");

/* Store R/G/B/Int curves in a datablock */ datablock = add_udv_by_name("$PALETTE"); if (datablock->udv_value.type != NOTDEFINED) gpfree_datablock(&datablock->udv_value); datablock->udv_value.type = DATABLOCK; datablock->udv_value.v.data_array = NULL;

/* Part of the purpose for writing these values into a datablock */ /* is so that the user can read them back if desired. But data */ /* will be read back using the current numeric locale, so for */ /* consistency we must also use the locale when creating it. */ set_numeric_locale(); for (i = 0; i < test_palette_colors; i++) { char dataline; rgb_color rgb; double ntsc; double z = (double)i / (test_palette_colors - 1); double gray = (sm_palette.positive == SMPAL_NEGATIVE) ? 1. - z : z; rgb1_from_gray(gray, &rgb); ntsc = 0.299 * rgb.r + 0.587 * rgb.g + 0.114 * rgb.b; sprintf(dataline, "%0.4f %0.4f %0.4f %0.4f %0.4f %c", z, rgb.r, rgb.g, rgb.b, ntsc, '\0'); append_to_datablock(&datablock->udv_value, strdup(dataline));

reset_numeric_locale();

/* commands to setup the test palette plot */ enable_reset_palette = 0; save_replot_line = gp_strdup(replot_line); save_is_3d_plot = is_3d_plot; fputs(pre1, f); fputs(pre2, f); fputs(pre3, f);

/* save current gnuplot 'set' status because of the tricky sets * for our temporary testing plot. */ save_set(f);

/* execute all commands from the temporary file */ rewind(f); load_file(f, NULL, 1); /* note: it does fclose(f) */

/* enable reset_palette() and restore replot line */ enable_reset_palette = 1; free(replot_line); replot_line = save_replot_line; is_3d_plot = save_is_3d_plot; }

Set Polecenie

set palette

przywraca standardowe ustawienia:

// color.c void init_color() { /* initialize global palette */ sm_palette.colorFormulae = 37; /* const */ sm_palette.formulaR = 7; sm_palette.formulaG = 5; sm_palette.formulaB = 15; sm_palette.positive = SMPAL_POSITIVE; sm_palette.use_maxcolors = 0; sm_palette.colors = 0; sm_palette.color = NULL; sm_palette.ps_allcF = FALSE; sm_palette.gradient_num = 0; sm_palette.gradient = NULL; sm_palette.cmodel = C_MODEL_RGB; sm_palette.Afunc.at = sm_palette.Bfunc.at = sm_palette.Cfunc.at = NULL; sm_palette.colorMode = SMPAL_COLOR_MODE_RGB; sm_palette.gamma = 1.5; }

Color/gray

Składnia :

set palette {gray | color }

Ustawia ciągły gradient koloru lub skali szarości. Gradient dyskretny (= nie ciągły) ustawia polecenie set palette maxcolors.

Ustawienie szarej palety kolorów:

set palette gray

przy standardowych ustawieniach odpowiada to:

set palette gray positive gamma 1.5 # nieliniowa

Jeśli chcemy otrzymać liniową paletę to ustawiamy gamma na 1.0:

set palette gray gamma 1.0 # liniowa paleta

Powrót do kolorowej palety:

set palette color

Zobacz też color modes:

//color.h /* * color modes */ typedef enum { SMPAL_COLOR_MODE_NONE = '0', SMPAL_COLOR_MODE_GRAY = 'g', /* grayscale only */ SMPAL_COLOR_MODE_RGB = 'r', /* one of several fixed transforms */ SMPAL_COLOR_MODE_FUNCTIONS = 'f', /* user defined transforms */ SMPAL_COLOR_MODE_GRADIENT = 'd', /* interpolated table: * explicitly defined or read from file */ SMPAL_COLOR_MODE_CUBEHELIX = 'c' } palette_color_mode;

File

Składnia:

set palette file '' {datafile-modifiers}

gdzie: filename jest to nazwa pliku palety zawierającego kolumny z danymi. Nie jest to plik z rozszerzeniem pal zawierający polecenia gnuplota, data-modifiers jest to opcjonalny składnik służacy do wybierania elementów z palety( tabeli). Przykład: 'using ($1/255):($2/255):($3/255)'.

Polecenie `set palette file` odpowiada poleceniu set palette defined, a dane są wczytywane z pliku filename.

Sprawdzamy zawartość pomocy:

help set palette file

Przypadki użycia: plik tekstowy (gpf nie pal, który wczytujemy za pomocą polecenia load), plik binarny, dane wczytywane z linii poleceń.

Plik tekstowy Składnia:

set palette file 'palette.txt' using ($1/255):($2/255):($3/255) # Read in a palette of RGB triples each in range [0,255]

W pliku mogą być: 4 kolumny: gray, R, G, B, trzy kolumny: R, G, B.

# http://soliton.vm.bytemark.co.uk/pub/cpt-city/arendal/arctic.gpf set palette file "arctic.gpf" set terminal png set output "arctic.png" test palette

Zbiory plików tekstowych: cpt-city : "Gnuplot Palette File (with gpf extension) in the RGB colour-space" ( 4 kolumny), Color Map for Scientific Visualization by Kenneth Moreland. Pobierany tabelę (float), zapisujemy jako plik tekstowy, zamieniamy przecinki na spacje i usuwamy lub komentujemy nagłówek tekstowy, pliki map programu Fractint (3 kolumny), Fractint [213 Map Files], Daniel Krajzewicz: free-color-palettes, webrot LUT maps. set palette file "Skydye07.map" using ($1/255):($2/255):($3/255) # Read in a palette of RGB triples each in range [0,255]

Plik binarny

Składnia:

set palette file "palette.bin" binary record=64 using 1:2:3 # put 64 triplets of R,G,B doubles into file palette.bin and load

Linia komend Możemy użyć tego polecenia do wprowadzenie tabeli kolorów w linii komend: zamiast nazwy pliku podajemy nazwę specjalną (ang. special-filename): "-"apimirror: gnuplot special-filenames, wprowadzamy tabelę, kończymy literą e.

# Equidistant rainbow (blue-green-yellow-red) palette set palette model RGB file "-" 0 0 1 0 1 0 1 1 0 1 0 0 e

# cpt-city/ma/gray/grayscale01a 0 … 100, continuous, RGB, 3 segments set palette file "-" 0.00000 0.00000 0.00000 0.00000 0.35010 0.93333 0.93333 0.93333 0.75000 0.80000 0.80000 0.80000 1.00000 0.66667 0.66667 0.66667 e

Cubehelix

Rodzina palet kolorów opracowana przez D.A .Green (2011)A colour scheme for the display of astronomical intensity images by D. A. Green, w której kolor (odcień) zmienia się wzdłuż standardowego koła kolorów, a jednocześnie intensywność rośnie monotonicznie, gdy wartość szarości zmienia się od 0 do 1.

Zalety: drukuje równie dobrze w kolorze i czerni/bielicubehelix-or-how-i-learned-to-love by James Davenport.

W kodzie:

// color.h: t_sm_palette typedef struct (Declaration of smooth palette, i.e. palette for smooth colours) /* control parameters for the cubehelix palette scheme */ double cubehelix_start; /* offset (radians) from colorwheel 0 */ double cubehelix_cycles; /* number of times round the colorwheel */ double cubehelix_saturation; /* color saturation */

The cubehelix palette can be modified by gamma. E.g.

set palette cubehelix gamma 2.0

Gamma

Składnia:

set palette gamma

Ustawia współczynnik gamma na wartość .

Standardowa wartość współczynnika gamma = 1.5.

Przykłady:gnuplot 5.5 demo pm3dgamma

set palette gamma 1.25

Gamma korekcja innymi metodami:gnuplot 5.0.4 : gamma

set palette model RGB set palette functions gray**0.64, gray**0.67, gray**0.70

lub:

gamma = 2.2 color(gray) = gray**(1./gamma) set palette model RGB functions color(gray), color(gray), color(gray) # A gamma-corrected black and white palette

W stosunku do palet szarych zamiast

set palette defined ( 0 0 0 0, 1 1 1 1 )

możemy użyć:

set palette defined ( 0 0 0 0, 0.5 .73 .73 .73, 1 1 1 1 )

Zobacz w kodzie: // color.h /* gamma for gray scale and cubehelix palettes only */ double gamma;

Model set palette { model { RGB | HSV | CMY | XYZ }

Modele kolorów: RGB oznacza Red, Green, Blue CMY oznacza Cyan, Magenta, Yellow HSV oznacza Hue, Saturation, Value

Modeli YIQ i XYZ nie należy używać (zła lub niepełna implementacja).

Functions

Składnia: set palette functions ,,

może być łączone:gnuplot 4.2 docs: Palette/Functions

set palette model HSV functions gray, 1, 1 # full color hsv = rainbow set palette model XYZ functions gray**0.35, gray**0.5, gray**0.8 # black to gold

gamma = 2.2 color(gray) = gray**(1./gamma) set palette model RGB functions color(gray), color(gray), color(gray) # A gamma-corrected black and white palette

Definicje: gray jest zmienną przyjmującą wartości od 0 do 1.

Rgbformulae

Składnia:

set palette rgbformulae ,,

skrócona postać:

set palette rgb r,g,b

r, g i b są to funkcje odpowiadające za obliczenie każdej ze składowej koloru (mimo że nazwy składowych są R, G oraz B to ich znaczenie jest zależne od modelu koloru, tzn. w modelu HSV R będzie oznaczało H). Mamy do dyspozycji 37 wbudowanych funkcji ponumerowanych od 0 do 36 (liczby ujemne dają odwrócony gradient). Możemy je wyświetlić:

show palette rgbformulae

Otrzymamy:

* there are 37 available rgb color mapping formulae: 0: 0 1: 0.5 2: 1 3: x 4: x^2 5: x^3 6: x^4 7: sqrt(x) 8: sqrt(sqrt(x)) 9: sin(90x) 10: cos(90x) 11: |x-0.5| 12: (2x-1)^2 13: sin(180x) 14: |cos(180x)| 15: sin(360x) 16: cos(360x) 17: |sin(360x)| 18: |cos(360x)| 19: |sin(720x)| 20: |cos(720x)| 21: 3x 22: 3x-1 23: 3x-2 24: |3x-1| 25: |3x-2| 26: (3x-1)/2 27: (3x-2)/2 28: |(3x-1)/2| 29: |(3x-2)/2| 30: x/0.32-0.78125 31: 2*x-0.84 32: 4x;1;-2x+1.84;x/0.08-11.5 33: |2*x - 0.5| 34: 2*x 35: 2*x - 0.5 36: 2*x - 1